Continuous Duty 1 3 Hp 230v Utility Pumps

Centrifugal Pump: 1/3 hp HP, 115/230, 22 gpm @ 10 ft, 62 ft Max. Head, 1-1/2 in NPT

• Item # 2YER2
• Mfr. Model # 2YER2
• UNSPSC # 40151503
• Catalog Page # 2647 2647

Country of Origin India. Country of Origin is subject to change.

Dayton close-coupled, non-metallic pumps produce high flow rates under moderate head conditions. Designed for continuous medium-pressure circulation and transfer of nonflammable liquids, water circulation, booster service, irrigation, spraying systems, jockey pump service, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction life is required. Water seal flush port is provided for the decontamination of chemicals on the seal and seat elastomers.

Tap image to zoom.

Roll over image to zoom.

Centrifugal Pump: 1/3 hp HP, 115/230, 22 gpm @ 10 ft, 62 ft Max. Head, 1-1/2 in NPT

• Item # 2YER2
• Mfr. Model # 2YER2
• UNSPSC # 40151503
• Catalog Page # 2647 2647

Country of Origin India. Country of Origin is subject to change.

Dayton close-coupled, non-metallic pumps produce high flow rates under moderate head conditions. Designed for continuous medium-pressure circulation and transfer of nonflammable liquids, water circulation, booster service, irrigation, spraying systems, jockey pump service, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction life is required. Water seal flush port is provided for the decontamination of chemicals on the seal and seat elastomers.

Technical Specs

• Item Centrifugal Pump
• HP 1/3 hp
• Phase 1
• Inlet 1-1/2 in NPT
• Voltage 115/230
• Amps 7.5/3.8
• Housing Material Polypropylene
• Impeller Material Polypropylene
• Volute Material Polypropylene
• Seal Material Buna-N, Carbon, Ceramic, Stainless Steel
• Seal Type Mechanical
• Outlet 1-1/2 in NPT
• Motor Enclosure ODP
• Max. Head 62 ft
• Max. GPM @ Head 22 gpm @ 10 ft
• Best Efficiency GPM @ Head 18 gpm @ 30 ft
• Min. GPM @ Head 2 gpm @ 60 ft
• Best Efficiency Range GPM @ Head 7 to 16 gpm @ 46 to 24 ft
• Length 15 in
• Width 7 5/8 in
• Height 7 1/2 in
• Hz 60
• NEMA/IEC Frame 56J
• Motor RPM 3,450 RPM
• Service Factor 1.75
• Wetted Materials Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel
• Shaft Material Stainless Steel
• Screw Material Stainless Steel
• Max. Liquid Temp. 140 Degrees F
• Max. Specific Gravity 1.0
• Max. Case Pressure 100 psi
• Max. Fluid Viscosity 100 SUS
• Inlet Pressure 75 psi
• Impeller Type Closed
• Bearing Type Ball
• Duty Continuous
• Max. Dia. Solids 1/4 in
• Port Rotation None
• Drain Plug Yes
• Agency Compliance c UL us
• Manufacturers Warranty Length 1 yr
• Application Aggressive Liquid Applications, Booster Service, Irrigation, Jockey Pump Service, Moderate Flow at Moderate Head Pressure, Spraying Systems, Transfer of Non-Flammable Liquids, Water Circulation, and Other General Purpose Pumping
• Includes Manual
• GPM of Water @ 10 Ft. of Head 22
• GPM of Water @ 15 Ft. of Head 20
• GPM of Water @ 20 Ft. of Head 19
• GPM of Water @ 25 Ft. of Head 17
• GPM of Water @ 30 Ft. of Head 15
• GPM of Water @ 40 Ft. of Head 10
• GPM of Water @ 50 Ft. of Head 7
• GPM of Water @ 60 Ft. of Head 2

Dayton close-coupled, non-metallic pumps produce high flow rates under moderate head conditions. Designed for continuous medium-pressure circulation and transfer of nonflammable liquids, water circulation, booster service, irrigation, spraying systems, jockey pump service, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction life is required. Water seal flush port is provided for the decontamination of chemicals on the seal and seat elastomers.

Compliance and Restrictions

• WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Documentation

There are no replacement parts available for this product.

beattyeastche.blogspot.com

Source: https://www.grainger.com/product/DAYTON-Centrifugal-Pump-1-3-hp-HP-2YER2

Share this post